INNOVATORS OF FIBERGLASS REPAIR PRODUCTS

Home Products Pipe & Hose Repair Kit Patch Kit Where to Buy Table of Contens Feedback http://www.lowes.com/lowes/lkn?action=productDetail&productId=16462-72798-FST260

wpe1.jpg (155820 bytes)          wpe3.jpg (106597 bytes)

DuraPower Patch Kit

Key Benefits

bulletPre-measured two part epoxy
bulletEasy to use
bulletNo external clean-up
bulletFlat surface repair & pipes
bulletMade in the U.S.A.

Click here for detail product information

Click here for copy of MSDS sheet

This is a PDF file. You will need Adobe Acrobat Reader to view and print this page. Acrobat Reader can be downloaded for free from Adobe's Web site (www.adobe.com/acrobat)

 

Instructions

Do Not Open Pouch Before Mixing.

Remove all pressure from the hose or pipe. Thoroughly clean and sand the area to be repaired. Put on the protective gloves supplied with this kit then hold each end of the interior package and pull firmly to remove the divider

Thoroughly mix the two parts together by hand or by sliding the package back & forth over a 90 degree surface for two minutes being sure the color is uniform. Cut open the package and remove the patch.

Apply the cloth extending 2" beyond the damaged area in each direction. Work out any bubbles. Excess resin may be applied over cloth. Pressure should be applied to repairs on damp surfaces. Repair will set in 20 minutes at 70 degrees F. (cold will extend setting time).

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
 

Name
Title
Company
Address
E-mail
Phone

 

DuraPower Table of Contents Page


Last modified: 02/06/08